Hi Takeshi,
I tried stopping quagga as below:
*root@mininet-vm:~/ryu# sudo service quagga stop*
*Stopping Quagga monitor daemon: (watchquagga).*
*Stopping Quagga daemons (prio:0): (zebra) (bgpd) (ripd) (ripngd) (ospfd)
(ospf6d) (isisd) (babeld).*
*Removing all routes made by zebra.*
However when i run the BGP application, i am still getting the same error
as before.
Thanks
Hadem
On Fri, Apr 13, 2018 at 5:38 PM, Yi Tseng <a86487...@gmail.com> wrote:
> Yes,
>
> I think because Ryu and Quagga uses same port for bgp protocol
>
> 2018-04-13 19:44 GMT+08:00 Pynbiang Hadem <pynbiang.ha...@gmail.com>:
>
>> Hi Takeshi,
>>
>> No, i have not shutdown Quagga daemon before starting Ryu. Do i need to
>> stop it?.
>>
>> Thanks
>> Hadem
>>
>> On Thu, Apr 12, 2018 at 9:35 PM, Yi Tseng <a86487...@gmail.com> wrote:
>>
>>> Hi
>>>
>>> please see comment inline:
>>>
>>> 2018-04-12 23:10 GMT+08:00 Pynbiang Hadem <pynbiang.ha...@gmail.com>:
>>>
>>>> Hi Takeshi,
>>>>
>>>> I am following the below steps:
>>>> 1) sudo python as.py ---> runs successfully
>>>> 2) On a new terminal: sudo mininet/util m r1 ---> Gives me a new prompt
>>>> but not sure if i am in a new separate namespace. Pls confirm if this is
>>>> the correct way
>>>> 3) On a new terminal: sudo mininet/util m r2 ---> Gives me a new
>>>> prompt but not sure if i am in a new separate namespace. Pls confirm
>>>> if this is the correct way
>>>>
>>>
>>> You can check if the ip address and routes is correct from shell
>>>
>>>
>>>> 4) I executed the following on the supposedly r1 and r2 terminals:
>>>> r1(supposedly): sudo ryu-manager
>>>> ryu/services/protocols/bgp/application.py
>>>> --bgp-app-config-file bgpconfig1.py
>>>> r2(supposedly): sudo ryu-manager
>>>> ryu/services/protocols/bgp/application.py
>>>> --bgp-app-config-file bgpconfig2.py
>>>>
>>>> However I am getting the following errors on both the supposedly r1 and
>>>> r2 terminal.
>>>> -------------------------------------------------------
>>>> Error creating socket: [Errno 98] Address already in use
>>>> hub: uncaught exception: Traceback (most recent call last):
>>>> File "/usr/local/lib/python2.7/dist-packages/ryu/lib/hub.py", line
>>>> 59, in _launch
>>>> return func(*args, **kwargs)
>>>> File
>>>> "/usr/local/lib/python2.7/dist-packages/ryu/services/protocols/bgp/base.py",
>>>> line 256, in start
>>>> self._run(*args, **kwargs)
>>>> File
>>>> "/usr/local/lib/python2.7/dist-packages/ryu/services/protocols/bgp/core.py",
>>>> line 238, in _run
>>>> server_thread.wait()
>>>> AttributeError: 'NoneType' object has no attribute 'wait'
>>>> -----------------------------------------------------
>>>>
>>>
>>>
>>> Have you shutdown Quagga daemon before you start Ryu?
>>>
>>>
>>>>
>>>> Pls Guide. Am i doing something wrongly?.
>>>> I am also attaching the two config files( bgpconfig1.py &
>>>> bgpconfig2.py)
>>>>
>>>> Thanks
>>>>
>>>>
>>>>
>>>>
>>>> On Thu, Apr 12, 2018 at 2:22 PM, Yi Tseng <a86487...@gmail.com> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> You need to write the configuration for your bgp routers, I think
>>>>> bgp_sample_conf.py includes everything you need, all you need is to modify
>>>>> values in that configuration
>>>>>
>>>>> After that, you can run Ryu bgp application directly in two network
>>>>> namespace with two configuration.
>>>>>
>>>>> I never try Ryu BGP application before, for more information, please
>>>>> follow instruction here:
>>>>> https://ryu.readthedocs.io/en/latest/app/bgp_application.html
>>>>>
>>>>> Yi
>>>>>
>>>>>
>>>>> 2018-04-11 21:46 GMT+08:00 Pynbiang Hadem <pynbiang.ha...@gmail.com>:
>>>>>
>>>>>> Hi Takeshi,
>>>>>>
>>>>>> I Think i have managed to enter the namespace of r1 using the* m
>>>>>> command.*
>>>>>> *Now, I have one more doubt;* How can we execute ryu
>>>>>> <https://github.com/osrg/ryu>/ryu
>>>>>> <https://github.com/osrg/ryu/tree/master/ryu>/services
>>>>>> <https://github.com/osrg/ryu/tree/master/ryu/services>/protocols
>>>>>> <https://github.com/osrg/ryu/tree/master/ryu/services/protocols>/bgp
>>>>>> <https://github.com/osrg/ryu/tree/master/ryu/services/protocols/bgp>/*application.py
>>>>>> *in r1 and r2 and get communication between r1 and r2 to happen?.
>>>>>> Do we need the ryu <https://github.com/osrg/ryu>/ryu
>>>>>> <https://github.com/osrg/ryu/tree/master/ryu>/services
>>>>>> <https://github.com/osrg/ryu/tree/master/ryu/services>/protocols
>>>>>> <https://github.com/osrg/ryu/tree/master/ryu/services/protocols>/bgp
>>>>>> <https://github.com/osrg/ryu/tree/master/ryu/services/protocols/bgp>/*bgp_sample_conf.py
>>>>>> *or the configuration done on r1 and r2 by your script is
>>>>>> sufficient?.
>>>>>>
>>>>>> Thanks
>>>>>> Hadem
>>>>>>
>>>>>> On Wed, Apr 11, 2018 at 6:32 PM, Pynbiang Hadem <
>>>>>> pynbiang.ha...@gmail.com> wrote:
>>>>>>
>>>>>>> Hi Takeshi,
>>>>>>>
>>>>>>> Would you mind showing some example to enter the namespace of r1. I
>>>>>>> can't seemed to figure it out.
>>>>>>>
>>>>>>> Thanks
>>>>>>> Hadem
>>>>>>>
>>>>>>> On Fri, Mar 16, 2018 at 1:15 PM, Yi Tseng <a86487...@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> 1)
>>>>>>>> Yes, this is normal
>>>>>>>> 2)
>>>>>>>> You need to enter network namespace of r1, and use telnet to access
>>>>>>>> quagga console
>>>>>>>>
>>>>>>>> To enter the namespace, you can use *m* command
>>>>>>>> https://github.com/mininet/mininet/blob/master/util/m
>>>>>>>>
>>>>>>>> 2018-03-16 0:20 GMT+08:00 Pynbiang Hadem <pynbiang.ha...@gmail.com>
>>>>>>>> :
>>>>>>>>
>>>>>>>>> Hi Takeshi,
>>>>>>>>>
>>>>>>>>> I am able to run it now, however, there are two things:
>>>>>>>>> *1) I am getting errRun mesages as below:*
>>>>>>>>> -----------------------------
>>>>>>>>>
>>>>>>>>> mininet@mininet-vm:~/bgp-3as$ sudo python as.py
>>>>>>>>> *** errRun: ['grep', '-c', 'processor', '/proc/cpuinfo']
>>>>>>>>> 1
>>>>>>>>> 0*** Setting resource limits
>>>>>>>>> *** errRun: ['which', 'mnexec']
>>>>>>>>> /usr/bin/mnexec
>>>>>>>>> 0*** errRun: ['which', 'ifconfig']
>>>>>>>>> /sbin/ifconfig
>>>>>>>>> ...
>>>>>>>>> ...
>>>>>>>>> *** errRun: ['stty', 'echo', 'sane', 'intr', '^C']
>>>>>>>>> 0mininet>
>>>>>>>>>
>>>>>>>>> ------------------------------
>>>>>>>>> *Is this normal?.*
>>>>>>>>>
>>>>>>>>> *2) How can i login to r1 console?. I want to run some bgpd
>>>>>>>>> command like*
>>>>>>>>> * bgpd-R1# sh ip bgp*
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>> Hadem
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Mar 13, 2018 at 10:07 PM, Yi Tseng <a86487...@gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> Please don't drop mailing list
>>>>>>>>>>
>>>>>>>>>> I just update it, please check again
>>>>>>>>>>
>>>>>>>>>> Yi
>>>>>>>>>>
>>>>>>>>>> 2018-03-13 18:19 GMT+08:00 Pynbiang Hadem <
>>>>>>>>>> pynbiang.ha...@gmail.com>:
>>>>>>>>>>
>>>>>>>>>>> Hi Takeshi,
>>>>>>>>>>>
>>>>>>>>>>> I run the topology file *as.py* from *bgp-3as* and i got the
>>>>>>>>>>> following error messages. Pls help
>>>>>>>>>>>
>>>>>>>>>>> mininet@mininet-vm:~/bgp-3as$ sudo python as.py
>>>>>>>>>>> *** errRun: ['grep', '-c', 'processor', '/proc/cpuinfo']
>>>>>>>>>>> 1
>>>>>>>>>>> 0*** Setting resource limits
>>>>>>>>>>> *** errRun: ['which', 'mnexec']
>>>>>>>>>>> /usr/bin/mnexec
>>>>>>>>>>> 0*** errRun: ['which', 'ifconfig']
>>>>>>>>>>> /sbin/ifconfig
>>>>>>>>>>> 0*** h1 : ('unset HISTFILE; stty -echo; set +m',)
>>>>>>>>>>> unset HISTFILE; stty -echo; set +m
>>>>>>>>>>> *** h2 : ('unset HISTFILE; stty -echo; set +m',)
>>>>>>>>>>> unset HISTFILE; stty -echo; set +m
>>>>>>>>>>> *** h3 : ('unset HISTFILE; stty -echo; set +m',)
>>>>>>>>>>> unset HISTFILE; stty -echo; set +m
>>>>>>>>>>> *** r1 : ('unset HISTFILE; stty -echo; set +m',)
>>>>>>>>>>> unset HISTFILE; stty -echo; set +m
>>>>>>>>>>> *** r2 : ('unset HISTFILE; stty -echo; set +m',)
>>>>>>>>>>> unset HISTFILE; stty -echo; set +m
>>>>>>>>>>> *** r3 : ('unset HISTFILE; stty -echo; set +m',)
>>>>>>>>>>> unset HISTFILE; stty -echo; set +m
>>>>>>>>>>> *** r1 : ('ip link add name r1-eth0 address e6:07:c4:3d:f1:ad
>>>>>>>>>>> type veth peer name r2-eth0 address 62:7d:bb:f1:1b:0b netns 1545',)
>>>>>>>>>>>
>>>>>>>>>>> added intf r1-eth0 (0) to node r1
>>>>>>>>>>> moving r1-eth0 into namespace for r1
>>>>>>>>>>> *** r1 : ('ifconfig', 'r1-eth0', 'up')
>>>>>>>>>>>
>>>>>>>>>>> added intf r2-eth0 (0) to node r2
>>>>>>>>>>> moving r2-eth0 into namespace for r2
>>>>>>>>>>> *** r2 : ('ifconfig', 'r2-eth0', 'up')
>>>>>>>>>>> *** r2 : ('ip link add name r2-eth1 address a6:4f:64:39:2b:af
>>>>>>>>>>> type veth peer name r3-eth0 address a2:49:d6:30:b2:d8 netns 1547',)
>>>>>>>>>>>
>>>>>>>>>>> added intf r2-eth1 (1) to node r2
>>>>>>>>>>> moving r2-eth1 into namespace for r2
>>>>>>>>>>> *** r2 : ('ifconfig', 'r2-eth1', 'up')
>>>>>>>>>>>
>>>>>>>>>>> added intf r3-eth0 (0) to node r3
>>>>>>>>>>> moving r3-eth0 into namespace for r3
>>>>>>>>>>> *** r3 : ('ifconfig', 'r3-eth0', 'up')
>>>>>>>>>>> *** h1 : ('ip link add name h1-eth0 address 1e:d7:9d:cf:13:61
>>>>>>>>>>> type veth peer name r1-eth1 address 22:e8:9b:a9:38:85 netns 1543',)
>>>>>>>>>>>
>>>>>>>>>>> added intf h1-eth0 (0) to node h1
>>>>>>>>>>> moving h1-eth0 into namespace for h1
>>>>>>>>>>> *** h1 : ('ifconfig', 'h1-eth0', 'up')
>>>>>>>>>>>
>>>>>>>>>>> added intf r1-eth1 (1) to node r1
>>>>>>>>>>> moving r1-eth1 into namespace for r1
>>>>>>>>>>> *** r1 : ('ifconfig', 'r1-eth1', 'up')
>>>>>>>>>>> *** h2 : ('ip link add name h2-eth0 address fe:c0:a8:2d:37:ab
>>>>>>>>>>> type veth peer name r2-eth2 address c6:20:a0:db:c1:cb netns 1545',)
>>>>>>>>>>>
>>>>>>>>>>> added intf h2-eth0 (0) to node h2
>>>>>>>>>>> moving h2-eth0 into namespace for h2
>>>>>>>>>>> *** h2 : ('ifconfig', 'h2-eth0', 'up')
>>>>>>>>>>>
>>>>>>>>>>> added intf r2-eth2 (2) to node r2
>>>>>>>>>>> moving r2-eth2 into namespace for r2
>>>>>>>>>>> *** r2 : ('ifconfig', 'r2-eth2', 'up')
>>>>>>>>>>> *** h3 : ('ip link add name h3-eth0 address fa:69:19:e0:af:d8
>>>>>>>>>>> type veth peer name r3-eth1 address de:d4:a5:1d:32:f1 netns 1547',)
>>>>>>>>>>>
>>>>>>>>>>> added intf h3-eth0 (0) to node h3
>>>>>>>>>>> moving h3-eth0 into namespace for h3
>>>>>>>>>>> *** h3 : ('ifconfig', 'h3-eth0', 'up')
>>>>>>>>>>>
>>>>>>>>>>> added intf r3-eth1 (1) to node r3
>>>>>>>>>>> moving r3-eth1 into namespace for r3
>>>>>>>>>>> *** r3 : ('ifconfig', 'r3-eth1', 'up')
>>>>>>>>>>> *** Configuring hosts
>>>>>>>>>>> h1 *** h1 : ('ifconfig', 'h1-eth0', '10.0.1.1/24', 'up')
>>>>>>>>>>> *** h1 : ('ifconfig lo up',)
>>>>>>>>>>> h2 *** h2 : ('ifconfig', 'h2-eth0', '10.0.2.1/24', 'up')
>>>>>>>>>>> *** h2 : ('ifconfig lo up',)
>>>>>>>>>>> h3 *** h3 : ('ifconfig', 'h3-eth0', '10.0.3.1/24', 'up')
>>>>>>>>>>> *** h3 : ('ifconfig lo up',)
>>>>>>>>>>> r1 *** r1 : ('ifconfig', 'r1-eth0', '10.0.0.4/8', 'up')
>>>>>>>>>>> *** r1 : ('ifconfig lo up',)
>>>>>>>>>>> r2 *** r2 : ('ifconfig', 'r2-eth0', '10.0.0.5/8', 'up')
>>>>>>>>>>> *** r2 : ('ifconfig lo up',)
>>>>>>>>>>> r3 *** r3 : ('ifconfig', 'r3-eth0', '10.0.0.6/8', 'up')
>>>>>>>>>>> *** r3 : ('ifconfig lo up',)
>>>>>>>>>>>
>>>>>>>>>>> *** h1 : ('ip r add 0.0.0.0/0 via 10.0.1.254',)
>>>>>>>>>>> *** h2 : ('ip r add 0.0.0.0/0 via 10.0.2.254',)
>>>>>>>>>>> *** h3 : ('ip r add 0.0.0.0/0 via 10.0.3.254',)
>>>>>>>>>>> *** r1 : ('ip a del 10.0.0.4/8 dev r1-eth0',)
>>>>>>>>>>> *** r2 : ('ip a del 10.0.0.5/8 dev r2-eth0',)
>>>>>>>>>>> *** r3 : ('ip a del 10.0.0.6/8 dev r3-eth0',)
>>>>>>>>>>> *** r1 : ('ip a add 10.0.1.254/24 dev r1-eth1',)
>>>>>>>>>>> *** r2 : ('ip a add 10.0.2.254/24 dev r2-eth2',)
>>>>>>>>>>> *** r3 : ('ip a add 10.0.3.254/24 dev r3-eth1',)
>>>>>>>>>>> *** r1 : ('ip a add 192.168.1.1/24 dev r1-eth0',)
>>>>>>>>>>> *** r2 : ('ip a add 192.168.1.2/24 dev r2-eth0',)
>>>>>>>>>>> *** r2 : ('ip a add 192.168.2.1/24 dev r2-eth1',)
>>>>>>>>>>> *** r3 : ('ip a add 192.168.2.2/24 dev r3-eth0',)
>>>>>>>>>>> *** r1 : ('/usr/lib/quagga/zebra -d -f zebra.conf -z
>>>>>>>>>>> /var/run/quagga/zebra-r1.api -i /var/run/quagga/zebra-r1.pid',)
>>>>>>>>>>> vty_read_config: failed to open configuration file
>>>>>>>>>>> /home/mininet/bgp-3as/zebra.conf: No such file or directory
>>>>>>>>>>> can't open configuration file [zebra.conf]
>>>>>>>>>>> *** r1 : ('/usr/lib/quagga/bgpd -d -f r1.conf -z
>>>>>>>>>>> /var/run/quagga/zebra-r1.api -i /var/run/quagga/bgpd-r1.pid',)
>>>>>>>>>>> *** r2 : ('/usr/lib/quagga/zebra -d -f zebra.conf -z
>>>>>>>>>>> /var/run/quagga/zebra-r2.api -i /var/run/quagga/zebra-r2.pid',)
>>>>>>>>>>> vty_read_config: failed to open configuration file
>>>>>>>>>>> /home/mininet/bgp-3as/zebra.conf: No such file or directory
>>>>>>>>>>> can't open configuration file [zebra.conf]
>>>>>>>>>>> *** r2 : ('/usr/lib/quagga/bgpd -d -f r2.conf -z
>>>>>>>>>>> /var/run/quagga/zebra-r2.api -i /var/run/quagga/bgpd-r2.pid',)
>>>>>>>>>>> *** r3 : ('/usr/lib/quagga/zebra -d -f zebra.conf -z
>>>>>>>>>>> /var/run/quagga/zebra-r3.api -i /var/run/quagga/zebra-r3.pid',)
>>>>>>>>>>> vty_read_config: failed to open configuration file
>>>>>>>>>>> /home/mininet/bgp-3as/zebra.conf: No such file or directory
>>>>>>>>>>> can't open configuration file [zebra.conf]
>>>>>>>>>>> *** r3 : ('/usr/lib/quagga/bgpd -d -f r3.conf -z
>>>>>>>>>>> /var/run/quagga/zebra-r3.api -i /var/run/quagga/bgpd-r3.pid',)
>>>>>>>>>>> *** Starting CLI:
>>>>>>>>>>> *** errRun: ['stty', 'echo', 'sane', 'intr', '^C']
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Thanks
>>>>>>>>>>> Hadem
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Mar 12, 2018 at 11:11 AM, Yi Tseng <a86487...@gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> [+mininet mailing list]
>>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> I think what you need to do is to create 6 network namespace
>>>>>>>>>>>> and run quagga+zebra process inside 3 of namespace.
>>>>>>>>>>>>
>>>>>>>>>>>> No switch(and controller) in your topology.
>>>>>>>>>>>>
>>>>>>>>>>>> All you need is to install mininet and quagga(via apt-get) and
>>>>>>>>>>>> enable ip forwarding on your host machine
>>>>>>>>>>>>
>>>>>>>>>>>> And run this example, this example creates 3 AS with 3 hosts,
>>>>>>>>>>>> AS exchanges prefix information using BGP message
>>>>>>>>>>>> https://github.com/TakeshiTseng/SDN-Work/blob/master/mininet
>>>>>>>>>>>> /bgp-3as/
>>>>>>>>>>>>
>>>>>>>>>>>> Yi
>>>>>>>>>>>>
>>>>>>>>>>>> 2018-03-11 16:21 GMT+08:00 Pynbiang Hadem <
>>>>>>>>>>>> pynbiang.ha...@gmail.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Can anyone suggest how i can achieve the target objective in
>>>>>>>>>>>>> mininet and ryu.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>> Hadem
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, Mar 11, 2018 at 11:30 AM, knet solutions <
>>>>>>>>>>>>> knetsolutio...@gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi ,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> KNet is alternative for Mininet. Host systems are based on
>>>>>>>>>>>>>> docker not namespace. KNet supports traditional routers(bird
>>>>>>>>>>>>>> routing
>>>>>>>>>>>>>> daemon), Servers also as hosts.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> But openvswitches are in the host system. Not in separate
>>>>>>>>>>>>>> namespace or docker contrainers.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I thought, you are looking for traditional BGP router in your
>>>>>>>>>>>>>> topology. Thats why i suggested this.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I guess, you need openvswitch in separate namespace / docker
>>>>>>>>>>>>>> container . Currently KNet doesnt support this.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>> Suresh.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Sat, Mar 10, 2018 at 11:22 AM, Pynbiang Hadem <
>>>>>>>>>>>>>> pynbiang.ha...@gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Suresh,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 1) KNet should be installed on Mininet or without Mininet?.
>>>>>>>>>>>>>>> 2) To achieve independent namespaces for each switches, do
>>>>>>>>>>>>>>> we need Quagga and Zebra?.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>> Hadem
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sat, Mar 10, 2018 at 10:24 AM, Pynbiang Hadem <
>>>>>>>>>>>>>>> pynbiang.ha...@gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks Suresh from KNet.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I will read the documentation, try it out and get back to
>>>>>>>>>>>>>>>> you for help, clarification and advice.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>> Hadem
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Fri, Mar 9, 2018 at 8:46 PM, knet solutions <
>>>>>>>>>>>>>>>> knetsolutio...@gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Check knet. It supports router node(bird routing daemon).
>>>>>>>>>>>>>>>>> you can setup such topology.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> http://knet-topology-builder.readthedocs.io/en/latest/
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I can help you.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>> suresh
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Fri, Mar 9, 2018 at 8:13 PM, Pynbiang Hadem <
>>>>>>>>>>>>>>>>> pynbiang.ha...@gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I want to simulate BGP connectivity between 3 ASes in
>>>>>>>>>>>>>>>>>> Mininet with one host in each AS as below:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> h1 -- AS1 -- AS2 -- AS3 -- h3
>>>>>>>>>>>>>>>>>> h2
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> How can i create the topology so that each AS is
>>>>>>>>>>>>>>>>>> represented by a switch/router and each router is in a
>>>>>>>>>>>>>>>>>> separate namespace?
>>>>>>>>>>>>>>>>>> What are the requirements to setup such an environment?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>>> Hadem
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>> ------------------------------------------------
>>>>>>>>>>>>>>>>>> Check out the vibrant tech community on one of the
>>>>>>>>>>>>>>>>>> world's most
>>>>>>>>>>>>>>>>>> engaging tech sites, Slashdot.org!
>>>>>>>>>>>>>>>>>> http://sdm.link/slashdot
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> Ryu-devel mailing list
>>>>>>>>>>>>>>>>>> Ryu-devel@lists.sourceforge.net
>>>>>>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> *Regards, *
>>>>>>>>>>>>>>>>> *Knet solutions.*
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> https://github.com/knetsolutions/KNet
>>>>>>>>>>>>>>>>> http://knet-topology-builder.readthedocs.io/
>>>>>>>>>>>>>>>>> http://knetsolutions.in/
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Regards, *
>>>>>>>>>>>>>> *Knet solutions.*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://github.com/knetsolutions/KNet
>>>>>>>>>>>>>> http://knet-topology-builder.readthedocs.io/
>>>>>>>>>>>>>> http://knetsolutions.in/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ------------------------------------------------------------
>>>>>>>>>>>>> ------------------
>>>>>>>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Ryu-devel mailing list
>>>>>>>>>>>>> Ryu-devel@lists.sourceforge.net
>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Yi Tseng (a.k.a Takeshi)
>>>>>>>>>>>> Taiwan National Chiao Tung University
>>>>>>>>>>>> Department of Computer Science
>>>>>>>>>>>> W2CNLab
>>>>>>>>>>>>
>>>>>>>>>>>> https://takeshi.tw
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Yi Tseng (a.k.a Takeshi)
>>>>>>>>>> Taiwan National Chiao Tung University
>>>>>>>>>> Department of Computer Science
>>>>>>>>>> W2CNLab
>>>>>>>>>>
>>>>>>>>>> https://takeshi.tw
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Yi Tseng (a.k.a Takeshi)
>>>>>>>> Taiwan National Chiao Tung University
>>>>>>>> Department of Computer Science
>>>>>>>> W2CNLab
>>>>>>>>
>>>>>>>> https://takeshi.tw
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Yi Tseng (a.k.a Takeshi)
>>>>> Taiwan National Chiao Tung University
>>>>> Department of Computer Science
>>>>> W2CNLab
>>>>>
>>>>> https://takeshi.tw
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Yi Tseng (a.k.a Takeshi)
>>> Taiwan National Chiao Tung University
>>> Department of Computer Science
>>> W2CNLab
>>>
>>> https://takeshi.tw
>>>
>>
>>
>
>
> --
> Yi Tseng (a.k.a Takeshi)
> Taiwan National Chiao Tung University
> Department of Computer Science
> W2CNLab
>
> https://takeshi.tw
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
