Hi Iwase ,
thanks for the response.
Regarding the below line,
>The BGP port on Ryu is connected as a "to host" port onthe OF-Switch,
I couldnot understand this point. How to configure this, and little more
details about this.
Can you share something more about this.
Thanks
Suresh.
On Thu, May 31, 2018 at 12:02 PM, Iwase Yusuke <iwase.yusu...@gmail.com>
wrote:
> Hi Suresh,
>
>
> > Query1)
> > Can we use the RYU BGP Speaker libaray, in this use case?
>
> Yes.
> I guess that use case is what exactly Ryu BGP speaker implementation is
> targeting.
>
> > if yes, could you provide some guide lines on how to use it.
>
> Sorry, I have no good document for such, but for example, the following
> architecture is one of the candidates.
>
> Ryu
> OpenFlow || BGP
> OF-Switch -------- Router
>
> Ryu has two (or more) connections with the OF-Switch, one is for OpenFlow
> and
> the other is for BGP. The BGP port on Ryu is connected as a "to host" port
> on
> the OF-Switch, then the OF-Switch will forward BGP packets (TCP port =
> 179) to
> Ryu's BGP port and the other packets will be forwarded based on the
> OpenFlow
> table.
>
> Thanks,
> Iwase
>
>
> On 2018年05月23日 21:33, knet solutions wrote:
>
>>
>> The BGP Speaker example shows that, the RYU BGP Speaker is a separate
>> process which handles packets directly from the socket/kernel (not via
>> Openflow encapsualtion).
>>
>>
>> My use case some thing like below,
>>
>> In this below diagram, Tradiational BGP Router (Bird routing daemon) run
>> BGP and connect to the openvswtich managed by the RYU controller. I would
>> like to enable the BGP application in the controller, so that when the BGP
>> Packet comes to the switch, switch sends the packet to the RYU , RYU will
>> use BGP Speaker to manage the control plane for this siwtch1.
>>
>> -------------------------------------------
>> |---------------------
>> Traditional BGP Router | ----------------------------------|switch1
>> |
>> (Bird Router) | | |
>> ------------------------------------------
>> ----------------------
>>
>> Query1)
>> Can we use the RYU BGP Speaker libaray, in this use case? if yes, could
>> you provide some guide lines on how to use it.
>>
>>
>> --
>> */Regards,
>> /*
>> */Knet solutions./*
>> Suresh.
>> https://github.com/knetsolutions/KNet <https://github.com/knetsoluti
>> ons/KNet>
>> http://knet-topology-builder.readthedocs.io/ <
>> http://knet-topology-builder.readthedocs.io/>
>> http://knetsolutions.in/
>>
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>>
>>
--
*Regards, *
*Knet solutions.*
https://github.com/knetsolutions/KNet
http://knet-topology-builder.readthedocs.io/
http://knetsolutions.in/
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
