> Date: Wed, 8 Dec 2004 18:12:28 -0800 (PST) > From: Robert Black <[EMAIL PROTECTED]> > >--- David Engle <[EMAIL PROTECTED]> wrote: >>What about LED's? Also for headlights and anything else possible. Has >>anything been put out on them that we could go by? > >Last month's 11/04 MR had an article about LED's for head >light's, a very good article I might add.
I have not read the November MR and I have not explored number board lights, but I have installed LED headlights in an AM RS-3. I use the Miniatronics 12-310-05 3 mm diameter "yelloglo" white LED. They come in a package of five for about $8. The package includes two resistors, 270 ohm and 470 ohm, for each LED, but I use a 1K ohm resistor instead. Installation was straight forward: There is a hole in the AM lens that I drilled larger to accept the LED, and I secured the LED in the lens with hot glue. -- Bill Roberts, San Francisco CA Change your membership, change your message settings, use our CALENDAR, view shared files or photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
