John, I've done my DCC conversions without isolating the frame. What is the benefit? Ben Trousdale
> Yes that is correct. For my DCC conversions on AM engines, I take > the frame out of the electrical loop. I disconnect the wire from > the engine to the frame and direct wire it into the extra wipers > making sure I keep the polarity correct between the two trucks. > When I did this conversion to my AM Train Masters, I also installed > a fiber washer between the gearbox and frame bracket just to make > sure I had no shorts and to eliminate the wobble. I probably will > do the same thing on my GP9s. > > Hope this helps, > > John Gibson > Rocklin, CA The poll results are in....... To REPLY to the list, use REPLY ALL, to reply to the sender, use REPLY. I do NOT know if this works on all e-mail software, but it works on some of the most common ones. Change your membership, change your message settings, use our CALENDAR, view shared files or photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
