I used the old Northeastern drop grabs and they fit both holes. There is a current company that makes S scale both straight and drop grabs of brass. Caboose Hobbies Denver stocks them. AG --------------------------------------------------------------------------------- I too use the cast dimples as locators. I use Huff N Puff grabs, and they have different spacing than the cast on dimples. I use the outside dimple to drill the first hole for each grab, then use the second end of the grab to mark the location of the second hole. Sincerely, Mike Sulzbach -------------------------------------------------------------------------------- John - I did that years ago to my pair of Black Widows. Seems to me there were dimples cast on the body that I used for starters for my drill. AG ================================================
As you may recall from a prior message, detailing my AM GP9s is one of my current modeling projects. I want to mount BTS grab irons as a ladder on the units. Any suggestions for mounting the irons in a straight line and evenly spaced on the shell? John Gibson Rocklin, CA [Non-text portions of this message have been removed] The poll results are in....... To REPLY to the list, use REPLY ALL, to reply to the sender, use REPLY. I do NOT know if this works on all e-mail software, but it works on some of the most common ones. Change your membership, change your message settings, use our CALENDAR, view shared files or photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
