Has anyone had experience with these towers coming apart? One of the threaded screw holes that holds the two halves together has become stripped and the screw no longer holds the thing tightly together. The result is that the screw holding the sideframe to the bottom doesn't hold either because its hole is slightly spread. That's a problem because of the 'spring drive'.
My temporary fix has been to dab some CCA glue into the threads of the housing, let dry and 'retap' the hole through the dried glue with the screw. I was surprised when it worked because of all the grease in these things. What's a long term fix to this problem other than buying a die and tap set of slightly larger size or ordering a new gear tower housing? Ben Trousdale To REPLY to the list, use REPLY ALL; to reply to the sender, use REPLY. For those of you on DIGEST mode, all REPLY messages go to the list (remember to edit the SUBJECT of your message). Change message settings, use our CALENDAR or LINKS, view shared files or photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
