Dear Fabrice,
This past weekend our club the Central Jersey S Scaler set up there
module layout. On 16' module has code 110, 83 and 70 in different parts
of the yard. Our SW-1s (as well as all code 110 wheels) are able to
negotiate this height rail with no problem. One section of my layout
has an icing platform with code 55 rail, it will go over that too. The
one caveat is the size of the spike heads. We used railcraft small
spikes to lay the rails. If the heads are too large, it is possible
that the flanges could hit the rail heads.
Let me know if I can be of further assistance. This is a very good FAQ
Best regards,
Don Thompson
S Helper Service Inc.
PS Very impressive models on you website.
FAYOLLE Fabrice wrote:
>Hi,
>
>I built layouts on different scales (N and O scale) but now I'm a beginner on
>S scale.
>I purchased one S-Helper Service SW-1. I changed the wheelsets but now what
>code of rail can I use ?
>Code 100, code 83 or smaller ?
>
>Regards, Fabrice Fayolle
>
>
>http://home.nordnet.fr/~ffayolle
>
>
>
>
To REPLY to the list, use REPLY ALL; to reply to the sender, use REPLY. For
those of you on DIGEST mode, all REPLY messages go to the list (remember to
edit the SUBJECT of your message).
Change message settings, use our CALENDAR or LINKS, view shared files or
photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
