and he notes - Try this tool:
http://www.ares-server.com/Ares/Ares.asp?MerchantID=RET01229&Action=Catalog&Type=Product&ID=81652 They make two sizes. Should work on brass sheet. Raleigh in Maine At 01:46 AM 11/18/2005, ctxmf74 wrote: > Hi All, I'm working on a boxcab loco, I've got sides cut out and >windows scribed, what's the best way to cut them? I'm thinking I can >drill holes at the corners and then cut them out with a jewelers saw >and file to the lines but maybe there's a quicker way? Perhaps lay >them on an anvil and chisel them out? or ? Any scratch builders have >suggestions? I wish this was plastic then I'd just cut them out with >my trusty razor knife and zona saws....dave > > > To REPLY to the list, use REPLY ALL; to reply to the sender, use REPLY. For those of you on DIGEST mode, all REPLY messages go to the list (remember to edit the SUBJECT of your message). Change message settings, use our CALENDAR or LINKS, view shared files or photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
