----- Original Message -----
From: Bill Roberts
To: [email protected]
Sent: Monday, July 03, 2006 9:01 PM
Subject: {S-Scale List} Re: SHS SW-1 Decoder
> I also ordered the similar Digitrax DH163IP, which has yet to arrive.
> It appears the Digitrax decoder may not have installed so easily in
> the SW-1, because, as Sam McCoy later warned, it would have
> interfered with the lighting springs. If and when it arrives, I'll
> see what other locomotive I can use it in.
I hate to beat this topic to death... but my level of DCC ignorance demands it.
So...
I contacted Digitrax about a decoder and asked them (among other things) if
they offered a decoder, comparable to the Lenz, that would be QUIET and
suitable for SOUND as well. Their (very short and seemingly unconcerned) reply
was as follows :
"DH163P (3" wire harness) or DH163PS (1.5" wire harness). For
applications
with no DCC 8 pin plug use the DH163D which must be soldered in."
So if I decide to go with the Digitrax brand, which one of these would I need?
And has anyone else out there used one of the above-mentioned decoders?
Thanks again.
John (Dead Horse) Degnan
[EMAIL PROTECTED]
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
