Jim K I presume this is the bridge tie product that was available with the RRM 175 ft pin connected truss bridge. If so, I can state they are an excellent product and easy to use. Now if I just had enough layout to use both of my bridges. Someday, at least one will be on a PVSGA module.
Jim Stapleton ============ At 11:47 PM 07/17/2006 +0000, raisinone wrote: >--- In [email protected], <[EMAIL PROTECTED]> wrote: >> >> <snip> so this should work for those that want to use flextrack on >bridges. <end> >> >If I missed it earlier in the conversation thread, I apologize, but has >anyone mentioned that Banta Models makes a laser cut bridge deck tie >kit? It even has laser notched beams to hold the tie ends. Add some >nut & bolt castings and rail and you have an instant bridge deck >w/rails. I think the kit is in 6" sections and covers up to a 175' >bridge deck. My experience is that once the ties, end beams and rails >are assembled and spiked down, it handles like a single piece of >straight track. > >Again if this was mentioned earlier, I missed it - sorry. If not, it >is discouraging for S manufacturers that 700+ people on this group >don't appear to know of a product that has existed since 2000. > >Jim K. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
