David, Sorry, I think I didn't research the site sufficiently. The twist ties are not available is S standard gauge, only in S narrow gauge. The turnout kits for S standard gauge include tie stick kits, and these are not bendable without removing the ties from the backer assembly. The bending can be done, but you lose any easy help from the kit.
Darrell --- In [email protected], "Darrell Smith" <[EMAIL PROTECTED]> wrote: > > David, > > Take a look at this web page: > > http://www.handlaidtrack.com/twistties.php > > I think it will answer your question. > > Darrell > > > --- In [email protected], "David Engle" <RIRocket@> wrote: > > > > Ref. questions from the HandLaidTrack website: Are those S scale > sets of ties for turnouts that they sell somewhat laterally flexible? > I have LH and RH turnouts to build,1 each, normally it would be > curved radii on both routes, but to fit existing, they will be > straight for about the first 2/3ds of the distance from points to > frog, then the main rout curve starts. > > > > Also, is 7x9 scale inch cross-section the only one they sell? I'd > like to match existing Morton-Tomalco tie strips, and they measure 6x8 > cross-section. > > > > DJE > > > > [Non-text portions of this message have been removed] > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
