Walthers did an HO transfer table (933-3131) in the late 90's. It was motorized, measured about 12"x12" and also had an extension available. Perhaps it could be modified. Discontinued but still pops up on Ebay or at flea markets.
I seem to recall the drive was not very good - gears were prone to slips and strips. Ken > John Degnan wrote: > > > Have there ever been any articles written about or plans/drawings > > published for TRANSFER TABLES? I'm getting readt to try and > > scratch-build one, and I could use any help anyone could offer. Any > > good ideas for motorizing and indexing one? Got any photos? > > > > Thanks. > > > > John D. > > [EMAIL PROTECTED] <mailto:railscaler%40comcast.net> > > > > > > > > > > [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
