Bill,
I put 12V or 14V bulbs in my GP 9's and 35's several years ago. I was
worried about the heat issue, therefore I cored out the lamp holes just
enough to insert a brass or aluminum tube. The bulbs are inside the
tubes and set so the front of the bulb protrudes just enough to look
like a lense. Still worried about heat, I also compromised on lamp
brightness by placing a low ohm resister in series with the bulb. The
GP35's look okay, but I still need to play with the brightness on the
9's. It's too dim, but my shells have not melted.
Ben Trousdale
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
