Larry Jackman wrote:
>All 40 ft and longer containers lock to each other
>at the the so called 40 ft mark. But this mark is not 40 ft. They are
>40FT over the posts and are a little less at the center of the
>locking holes.
Afaik, Larry is correct about that.
But the "40 foot" SSA/DPH containers that I have measure 7.25 inches
(38.67 scale feet) overall.
The 48 foot SSA/DPH containers I have are short of 48 scale feet by
about a scale foot as well.
Could shrinkage of the plastic after removal from the mold have caused
the error?
Chuck F.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
