Ed,
I have a copy that I will put in the mail to you on Monday. It is a one
page article.
Lee Johnson
on 5/20/07 8:34 AM, Edward Loizeaux at [EMAIL PROTECTED] wrote:
> Gents....
>
> I am looking for some details and/or magazine articles on the method
> used by, I think, the Cleveland Cuyahoga S Gauge Club. This technique,
> if I remember correctly, is used on the club's modular layout. It
> consists of a tube soldered to the outside of the rail across the
> modudule joints. The rail and tube are then cut on the joint line. An
> L-shaped piece of piano wire is then inserted into the tube to provide
> perfect rail alignment. This approach has been written up in a magazine
> article (or two) several years ago.
>
> If anyone could share the exact details of this method, I would be most
> appreciative. Copies of the magazine article would also be helpful. I
> thing the S GAUGE HERALD had a writeup along with some sketches, but it
> might have been some other publication. Memory fades fast at this phase
> of my lifespan.... Copy and postage costs will be cheerfully
> reimbursed.
>
> Your help will be appreciated.
>
> Thanks...Ed Loizeaux, 2221 Via Maderos, Los Altos, CA 94024-7113.
>
>
>
>
> Yahoo! Groups Links
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
