Hi George,
Offhand, I would say that the hole can be any size and width, as long
as the linkage is free to move and not bind or run out of traveling
room. I'm guessing that most modelers would probably want the hole to
be as small as possible to be as inconspicuous as possible but still
give totally free movement to the linkage. The position of the guide
bar could be a factor in how much movement the linkage requires. IOW,
lower = wider and higher = narrower.
Regards,
Tim Brown
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
