> I'm using American Models and SHS wheelsets and a mixture of
> Shinohara and Tomalco turnouts. Which wheelsets would someone who
> already has this combination recommend?
> George Courtney
George...The important thing is that all of the turnouts AND all of the
wheelsets are accurately gauged to the NASG track/wheel
standards/gage. If this is done without fail, you should have good
operation. Typically commercial products of all kinds will need to be
inspected (using the gage) and some "adjustments" will have to be made
since little comes perfect all the time -- even mass produced plastic
and expensive brass sometimes need "adjusting". Good luck...Ed L.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
