The main problem is the rear drive line is too short. Therefore it angles excessively & vibrates on curves. They made them unequal length to clear the cab interior. The best solution is the River Raisin replacement drives, but I have never seen them come up on Ebay. Otherwise it takes some real mechanical ingenuity. I have a couple of designs, but they are not simple. One requires two motors.
--- In [email protected], "ehsauers1" <[EMAIL PROTECTED]> wrote: > Got a couple of Overland F7 units that are very noisy, it appears there > is a lot of slop in the delrin universial linkage and they are > certainly not spinning very true. There is also a fair amount of > vibration coming from the mashima cam motors. Before I replace the > motors I will try a more up to date power source to see if the power > pack is causing the motor vibrations. If anyone has upraded they Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
