Jeff, I would be curious as to how many guys ordered based on the
article I wrote in the Dispatch. I have written articles before where
none have followed through.
Next talk real nice to John and ask him to consider a six wheel
truck--either the RSD or RSC truck. My preference would be the RSC
which were equally spaced axles where the middle axle was not powered.
However, I would purchase either version. I think if would add a bit of
interest in building the pewter kits because American Models makes the
standard RS-3 and some of us want somthing different.
Bob Werre
BobWphoto.com
Jeff Smith wrote:
> As many of you know I make a scale RS drive for our RailMaster Hobbies
> RS1/2/3. This drive is available separately from the RS kit. I know many
> of you have used them to replace worn out drives in you brass RS units. I
> am getting ready to purchase some more drives but I need to know how
> many of
> you are interested in buying this drive.
>
> Could you please email me off the list if you would like to reserve one of
> these drives.
>
> Jeff Smith
>
> RailMaster Hobbies
>
> Lakewood, CA
>
> www.railmasterhobbies.com
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
