--- In [email protected], "thebrassbasher" <[EMAIL PROTECTED]> 
wrote:
>
>  I've decided I need to install Soundtraxx's new Tsunami's in my
> Pittman powered brass steam locomotives and go all DCC. In my case
> that would be the NYC Niagara, UP 4-8-4, SP Daylight, C&O Allegheny,
> and a couple of others. Joy for joy, what fun I've had. Now I'm 
aware
> that every electronic device comes with just so much smoke inside, 
and
> if you let all the smoke out it's all over for that device.  <snip>

Hey Rusty... betcha I can make more smoke than you!  I cooked a 
LokSound decoder in a Niagara pulling a heavy train.  Smoke was 
rolling out of the cab and stack by the time I was done!! <G>   
Following up on Bill's point, the LokSound folks replaced the decoder 
no questions asked when I sent it back with the receipt.

I do have a non-sound NCE decoder in an Allegheny that has performed 
flawlessly.  If I could find an Allegheny sound file, I would add 
sound, but no luck on that yet.  My next step with the Niagara will 
be to install an NCE decoder to run the engine/lights and a LokSound 
decoder for sound only.  That adds the cost of the NCE decoder, but 
it's less than 20 bucks.  I've had excellent luck that way on 
diesels; I'll let you know how the Niagara reacts.  One other thing, 
I'm assuming you already know this, but for DCC you should always 
make sure the motor is electrically isolated from the frame.  Poofed 
a few early Digitrax decoders that way in my "learning DCC the hard 
way" days...!

Those Maxon motors cost more than $100 for a reason!!!

Good luck...
Jim K.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/S-Scale/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/S-Scale/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[EMAIL PROTECTED] 
    mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Reply via email to