The SDS Gaugers are putting together some S MOD modules, and have
selected SHS flex track (code 125/131) as our standard. In order to get
smooth curves without "boxed" joints, I'm attempting to solder a couple
of sections of SHS flex track together, but am not getting good
results. Basically, the joint is not whetting and the solder is not
flowing. My assumption is that I'm not getting enough heat on the
joint - I'm using a 40watt iron and lead free electrical solder.
If any of you folks have experience in this area, Id appreciate any
sugggestions as to technique and tools that will help me get good
dependable solder joints.
Thanks...
Peter Gagnon
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
