I bought one of them. After playing around with it and using it to light up one of my cabooses marker lights and interior lights i decided that was it. I then bought 12 more. These things are really nice. The only thing Dallee needs to do is make one that is controlled using DCC so I don't have to add a decoder. I also bought the DC yardmaster from them to use as my bench power supply. Any short circuit at all and it winks from green to red to let you know you have a problem. It is small and really handy. The old MRC is under the bench with the bugs and mice. There is another good part but I will not start a thread about that. This isn't the place. I will say that if you have a question, call them, they will talk to you.
Rusty Rustermier --- In [email protected], wj...@... wrote: > > > In a message dated 7/25/2010 9:21:26 PM Eastern Daylight Time, > pickyca...@... writes: > > Back to power drain. After the last of the Sunday tour was over I took the > floor off a Budd car and saw that it will be quite easy to replace the > bulbs with lower amp bulbs or LEDs. If LEDs is there a better way reduce the > voltage (DCC) other than placing a resistor in series with the LEDs? > Ben Trousdale > > Take a look at DALLEE _http://www.dallee.com/LED_lighting.htm_ > (http://www.dallee.com/LED_lighting.htm) , much lower draw, adjustable and > affordable. > I'm a dealer or contact DALLEE directly. > > Jim Lyle > > > [Non-text portions of this message have been removed] > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
