--- In [email protected], "drgw223" <frasc...@...> wrote:
>
> All,
>
> Does anyone have any suggestions on what to use for glazing on the AM FP-7
> porthole windows? Does anyone make a round clear window insert that would
> fit the AM carbody? The car side is too thick to merely attach clear styrene
> to the back side of the window. As far as I know AM doesn't make a window
> insert to fit the opening. Do they?
>
> Bob Frascella
> Wenham, MA
>
Bob, I once picked up a sheet of circular clear styrene "punch outs" in
various diameters from Banta. Not sure if any of the sizes fit the side
portholes, but some were large enough to fit in headlight openings.
I know Bill Banta is out of producing S scale, but these are multi-scale.
Another possibility is to use a piece of sharpened brass tubing to punch out
your own. I thought of running a cone shaped abrasive bit into one end of the
tubing to create a sharp edge in a perfect circle.
Bud Rindfleisch
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
