Earl, Unless your inkjet prints really poorly I don't see an advantage to your print/scan/print proposal. Most sub-$100 inkjets these days do a great job at color printing. Use the white decal paper whenever possible to get a more opaque color. You might also experiment with the print settings on your printer testing different paper types until you find a good balance between color saturation and wetness. Each different paper type alters the amount of ink the printer uses. Some types call for more ink, some less. Also, check the head alignment and clean the heads before your final run. This can eliminate that banding you sometimes see with inkjets.
Double printing is really tricky and really difficult on all but commercial equipment. There is just no way to get perfect registration between each pass. I doubt Kinkos can do it. All the manufacturers make decent inkjet printers. I prefer anything with at least six colors under $100. I seem to use a lot of Epsons. It sounds crazy but I buy a printer, use it until the ink runs out and then go but another printer. Usually replacing the six or more ink cartridges cost more than the printer. Ridiculous but true. Archival or 100 year inks seem to be more color stable and run less than others. The above all combined seem to give me excellent inkjet printing results. Chris Borgmeyer Westfield Center, OH --- In [email protected], tennsga...@... wrote: > > Thanks for sharing this information. > > I am very amateurish as a decal maker and would only do it for myself. I > have been successful in making decals with black letterboards. I have not > tried color. However I have given it a lot of thought, though my thinking > may or may not be good on the subject. > > One of my thoughts, if I was to try to make my own color decals would be to > first print the decals larger than the desired size, preferably double. > This would be on my inkjet printer because I do not have a laser printer. > Then I would take the printed image to Office Max (or similar store) and > get them to copy it on their laser printer at 50% reduction on decal paper I > would probaly have to supply. I would also have them print the image twice > (or more) on each printed page to increase the color satuation. Then I > would spray the printed page with decal film. > > Has anyone tried this? > > - Earl Henry, Nashville ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
