Gerry, You will find those items...eventually. As a quick substitute
for the squares go to Home Depot and get some right angle braces. They
are true right angles. For the CA glue dispensers, I just made some new
ones. Borrowed some of my wife's needles and cut them with a cut-off
disk after poking them in a piece of basswood.
Bob Werre
BobWphoto.com
On 11/25/10 9:51 AM, Gerry Evans wrote:CA applicators, however, are a
different thing. These are 1/4" dowels with sewing needles stuck in
their ends and the eyes cut approximately in half so I can transfer CA
from a puddle on a ceramic tile to the glue point. I bought them at an
Sn3 Symposium quite a few years ago from someone whom I cannot recall.
So, here, finally, is the question: Does anyone know of a source for
these tools?
>
>
> Gerry Evans--Now happily residing in St. Louis and still a property
> owner in Flagstaff
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
