I had thought about trying a simple stick pin with a sharp bend. I
don't know if the convex shape of the pin would be a problem and I'm not
certain if the size might be a tad too small. I do know many older
vehicles had mirrors roughly 4" in dia.
I've had the problem of actually tying to put a load in the box. I
would guess that the thickness of the model's sidewall is roughly that
of the real deal; leaving less room for cargo.
Bob Werre
BobWphoto.com
On 1/13/11 11:56 AM, Pieter Roos wrote:
>
> These trucks (and nearly all other diecast models) lack both side view
> mirrors. They are not too hard to add, being either a small circle or
> rectangle on a post, but it was nice when the RC cars came with them!
>
> Pieter E. Roos
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
