I buy the cork from Century Tile. I use a 4 foot level as a template. Place
one edge of the level against the edge of the cork, using a utility I make
a cut along the inside edge which leaves a nice 2 inch wide strip. For
corners you need to cut this trip in half length wise to make strips that will
bend to meet your curve.
For yards you just use a sheet to match your width.
Clue with caulk or a Liquid Nails type product.
John Griffin
Des Plaines Valley
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
