These items pertain to the trucks used under the 85-foot Pullman cars.
a. Has anyone ever tried to fix the problem of the little plastic studs at the
ends of the bolsters working loose, maybe a drilled hole and machine-screw
solution. I thought I saw a successful remedy like this some years ago.
b. Has anyone tried something on the order of a swing bracket that effectively
gives a radius of about an inch of swing when used with either the 802 or #5
boxes. I found the KaDee HO swing brackets are more detailed and complicated
than I can single-handedly use. Maybe an inverted channel piece that takes a
draft gear box in a pocket then hinges from a screw about 3/4" back of the back
of that box, may need a carry iron on the front to support.
DJE.
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
