My "highly trained" former auto mechanic once hooked up fog lights to the
low beams (legal in PA) under the dash with "suitcase connectors". Some
time later, I drove 35 miles after midnight with NO low beam headlights
because he chose the easy route. I don't use them. Simply strip the
wire back a 1/4" with the IDEAL Stripmaster, wind the riser around it,
solder, insulate & move on Quick, simple, strong.
Jim "planning to double the traveling layout" Lyle
In a message dated 1/25/2011 4:16:28 P.M. Eastern Standard Time,
[email protected] writes:
have seen it reported that the connectors are prone to failure IF the
correct crimping tools isn't used in connecting them, but I do not have
first-hand experience to back that up.
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
