I have an Overland 0-8-0 that has been dissambled by persons unknown to me. The
6 side rod screws are missing. I also launched 1 of the screws that holds the
eccentric rod to the bellcrank. Other screws missing include the boiler mount
screws and the pilot screw along with some other misc ones. Is it possible
someone has a way to id the missing?
Another issue is one of the drivers on the geared set was removed. As I put it
into position on the axle it seemed loose, no drag on the axle at all. there
are no splines on the axle end. Any possible help with any of this is
appreciated.
Luther "S"
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
