Tom,
For resin flux, I use Denatured Alcohol
For acid and silver flux, I brush thoroughly with a wire brush, then wash
with soapy water.
Gary Chudzinski
>Tom Stoltz writes:
I'm wondering how most of you clean off flux residue after soldering.
Especially, the silver soldering flux. I can't imagine most would follow
the manufacturer's instruction to the letter; there are a lot of hoops to
jump through.
So, what do you do?
Just curious,
Tom Stoltz
Tom's Turnouts & Trackwork
Maine S Gaugers
NASG
<http://www.tomsturnouts.com/> www.tomsturnouts.com
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
