Group,
Want to share with the group my finding of a O-scale Pin-Connected truss bridge
by John Palecki http://www.jpstructures.com/ . The bridge is 30" long but you
can remove sections of (3.75") to shorten the span if needed. The dimension
are more appropraite then most O-scale bridges (roughly 3.9 X 4.9" inside). The
only hard part will be cutting the steel stringers to length. I have ordered
one and plan on removing 2 sections which will give me a 22.5" span. John has
been very helpful in supplying info, he even provides a drawing of what the
bridge will look like with the section removed.
Check out his site.
Ed Sauers
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
