I've never bothered to fill in the overly large pilot opening, but I
have used the BTS parts designed for the FA's to help detail the other
ends--these really help the appearance. I've always hoped "someone"
would make a urethane or plastic insert for the front pilot.
Bob Werre
>
> Hi Group,
>
> In 2004 I asked this same question and a message search only turned up
> the question. So I am now wanting again to install KD couplers on some
> AM PA's I have and never got around to doing it.
>
> What have you done to acomplish this? I look at the truck mounted tang
> for the couplers and I think there must be a better way. I think I
> could drill and body mount the rear couplers and the ones on the B
> unit but what about the front couplers?
>
> Any help or suggestions will be appreciated.
>
> I normanly run on track with a 47 or 50 inch radius with #8 turnouts.
>
> Thanks
> Bob Boring
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
