Dear Bob, I believe these are Cascade Models (John Beverage sp?) that Robin and I (Train Stuff) cast up in the early 80's. They are made in a low temp zinc alloy that we were able to spin cast using RTV molds. If I remember correctly the alloy was called S1. The bolster is made of brass sheet stock and the sideframes attache with an e-clip. Right now I am in Fayetteville, NC and do not have my records at hand... Don
On Nov 4, 2011, at 10:41 AM, shabbona_rr wrote: > I have posted a photo of a passenger car truck, > > http://groups.yahoo.com/group/S-Scale/photos/album/1775582643/pic/1239643121/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc, > > that someone manufactured in the late 1970's or early '80's. I would like to > find [at least] three more pairs of these trucks if anybody has any to spare. > > Contact me off line, please. > > Bob Nicholson ____________________________________________ > > [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
