--- In [email protected], WJJIM@... wrote:
>
> BE WARE of too cheap & too flimsy. IF you think it might move at some
> point, make it movable now.
>
Yeah, Make it in self contained benchwork sections that bolt together and
can be easily unbolted. Don't make it so one has to cut benchwork apart to
remove it. I've found that adding a thin spacer "gasket" between the sections
gives a little sacrificial length to the rails so they can be just run across
the section joints then cut with a dremel if it ever becomes necessary to
move....DaveBranum
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
