Also, "brushing" paint is a misnomer - what you want to do is flow paint onto the model using a brush. In my opinion, the brush should never actually touch the surface you are painting. I agree with Wesley that you need to get that paint on there and not touch it again with the brush.
-Michael Eldridge -airbrush advocate --- In [email protected], Wesley Ewell <twofootartist@...> wrote: > > You were wise to dilute the paint but you don't need to dilute it so much. > The key to spreading any enamel is to lay it on and leave it alone. If you go > over it again with the brush after the initial lay-on you will leave brush > strokes. Working fast also helps. -Wes Ewell > ________________________________ > From: Tyler <tfroatz4@...> > To: [email protected] > Sent: Friday, December 2, 2011 10:27 PM > Subject: {S-Scale List} Eliminating brush strokes in enamel paint > I'm trying to paint some `S'-scale machinery using Model Masters `Interior > Green' 2062 and keep getting fine brush stroke lines on the large flat > surfaces of this equipment. ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
