--- In [email protected], Edward Davis <edandhdavis@...> wrote:
>
> Hi,
>
> I know that this topic has been talked to death, but I still need an answer
> to one question. I installed two leds into the headlight housing of a AM
> GP35 using two fiber optic tubes as lens. The leds work fine and the lights
> look great. However, when I attempt to turn out the lights, they only dim
> slightly and don't turn off. What am I doing wrong? My decoder is a
> Soundtraxx DSD 101LC and my system is a Digitrax Empire Builder with a DT400R
> throttle.
>
> Ed Davis
> Stockton, Ca
=====================================================================
Ed:
I do not believe the Soundtraxx DSD series of decoders support LED lighting. As
you have discovered, you can use LEDs (with the proper resistors) but they will
not work as well as a bulb. I believe this may be the reason for the problem
you are experiencing.
LED support was one of the upgrades made on the Soundtraxx Tsunami series of
decoders.
John Gibson
Rocklin, Ca
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
