Attached are a couple photos of the decoder mounting I discussed earlier. In the close up, the four mounts (tabs) facing away from the camera have the two motor leads and two speaker leads attached. The four tabs facing the camera are for functions 5 & 6. The pair of tabs open in the middle at the left and right are for the headlight and tail light. The outside tabs on the left and right are where the all wheel pick up leads are attached. I mounted the decoder and the speaker with double stick tape on top of fabricated styrene mounts.
Bill, I hear you about the gear noise - I have developed some tuning methods to minimize that and I'll respond to you about it... http://groups.yahoo.com/group/S-Scale/photos/recent/1881243438/view Jim Kindraka [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
