> I have thought of doing somethng similar <snip> but with code 125/126 rail.
> <snip> to construct about four #8 turnouts and four #6 turnouts.
> Tom
Tom.....My former layout used code 125 rail and Old Pullman scale turnouts. My
recollection is that scale and high-rail worked OK in general. AF equipment
mostly bumped badly over the frog/guard rails, but stayed on the track -- most
of the time. A very few pieces of AF rolled along on the ties due to very
large flanges and they did not do well going through turnouts. I was surprised
that AF had not standardized on their flange sizes. Same comment could be made
about Lionel/AF today -- 50 years later. Good luck....Ed L.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
