I'll second what Bill says. Check to see if the bronze bearings you want
to replace are round or square and measure them if possible before
ordering.
Also please note if you are ordering the 2691-6 code 110 replacement
gearing and wheels from NWSL/Oso be sure to give them the same
information because theirs only fit the newer square bearing version. If
your seats are round bottom, you will have to mill or veery carefully
file out the bearing seats truly square across the frame to fit them, or
buy newer replacement trucks frames from AM.
Chris
--
J Chris Rooney Ponte Vedra Beach, FL, [email protected]
www.VannessCompany.com
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
