Bill,
Nice modeling on the picture, but it reminds me why I cut most of the Kadee "glad hands" off. I don't like the way they look when you have an air hose. Dave Heine Easton, PA From: [email protected] [mailto:[email protected]] On Behalf Of Bill Lane Sent: Sunday, August 26, 2012 7:45 PM To: [email protected] Subject: {S-Scale List} cut lever brackets [1 Attachment] [Attachment(s) from Bill Lane included below] Bruce, The cut lever bracket was the first item I made 15 years ago. I made 2 versions - old school from brass master patterns. Once the mold dies - which it may have - this part is done. The master patterns died in making the mold. Solidworks could come to the rescue. All it takes is money! Thank You, Bill Lane Modeling the Mighty Pennsy & PRSL in 1957 in S Scale since 1988 See my finished models at: http://www.lanestrains.com <http://www.lanestrains.com/> Look at what has been made in PRR in S Scale! See my layout progess at: http://www.lanestrains.com/My_Layout.htm Custom Train Parts Design http://www.lanestrains.com/SolidWorks_Modeling.htm PRR Builders Photos Bought,! Sold & Traded (Trading is MUCH preferred) http://www.lanestrains.com/PRRphotos.xls ***Join the PRR T&HS*** The other members are not ALL like me! http://www.prrths.com <http://www.prrths.com/> http://www.lanestrains.com/PRRTHS_Application.pdf Join the Pennsylvania Reading Seashore Lines Historical Society It's FREE to join! http://www.prslhs.com <http://www.prslhs.com/> Preserving The Memory Of The PRSL Attachment(s) from Bill Lane 1 of 1 Photo(s) <http://groups.yahoo.com/group/S-Scale/attachments/folder/1043094959/item/16 41145956/view> DSCF5188.JPG <http://groups.yahoo.com/group/S-Scale/attachments/folder/1043094959/item/16 41145956/view> DSCF5188.JPG
