Code 88 wheel sets work just fine in Sn3. They are available from PVC in 26" dia. The wheel set is ribbed backed and have Denver Griffen on the front. I can have Standard gage wheel sets made in 33" with the proper check gage if enought are deposited for. Quanity needed are 1000-2000. Paul PVC
________________________________ From: ctxmf74 <[email protected]> To: [email protected] Sent: Wednesday, October 24, 2012 10:42 AM Subject: Re: {S-Scale List} S Scale Loco & Supply new stainless steel wheels --- In [email protected], gftolhurst@... wrote: > > I strongly agree with John D. NMRA RP-25 wheels in code 88 have been shown to > work well in HO. Based on my amateur-level understanding of physics, the same > tread profile should work even better in S, due to greater weight of the > equipment. Code 88 wheels would work as fine in S scale as they do in HO scale and P64 wheels would work as fine in S scale as P87 and P48 wheels do in HO and O scales. It's not a matter of physics it's a matter of availability and pricing. If P64 trucks were as easy to get and cost the same as SHS trucks I'd have standardized on them long ago. N scalers have proved that small flanges are just as reliable as big flanges so use the wheels that appeal to you and don't worry about the physics as they work.....DaveBranum ------------------------------------ Yahoo! Groups Links http://docs.yahoo.com/info/terms/
