I was installing 802 couplers on some new cars and decided to try the suggested
method on the instructions of reducing slack action. First I think I need to
grow at least one more hand with finer fingers and motor control. But the real
question is how long to make the rod insert? The instructions suggest 0.156"
(5/32"). That seems to be too long for the 802s. I also tried something
shorter than 0.125". That seemed too short and allowed too much slack to
remain in shank travel. So now I'm at about 0.125" which seems about right -
perhaps cutting out to much slack.
What has the experience of others been?
Ben Trousdale
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
