I've posted a photo of a Bill Lane's resin F33 under construction at:
http://groups.yahoo.com/group/S-Scale/photos/album/1244646779/pic/1694167727/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc
I am in a bit of a quandary. I have a set the recommended trucks from SSL&S and
I am not sure how to mount them. It doesn't seem possible to use a mounting
screw from the bottom as the middle axle is in the way. I could mount the
unassembled truck base and then attach the side frames and wheels
after-the-fact but that seems a royal pain at best. I also can't screw down
from the top for obvious reasons.
I was thinking of just gluing a pin in the bottom of the car and let it float
on the trucks. That would give the first person who picks it up a surprise. :)
Any suggestions?
Keith Thompson
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
