I have had very good luck with Sinbad. The most important thing to make sure the mating surfaces are clean. Wash them and then use some sandpaper on the sruface. I also often use a 5, 10, or 15 minute epoxy.
Roy J Meissner ----- Original Message ----- From: Gerry Siegel To: [email protected] Sent: Thursday, January 03, 2013 7:58 AM Subject: {S-Scale List} Re: Gluing Urethane resin building kits You might want to try the cyanopoxy type of glue. I have found that the Sinbad brand works well. Gerry Siegel
