I can re-guage and spike them easy enough, I've got the material and experience to do the job, I just need to know what to do to get them apart without hopelessly damaging the ties or bending up the rails. After this, I think I'll look into Fast-trak jigs.
Thanks, Bob Davis - In [email protected], "Andre Ming" wrote: > > Once a Tomalco switch was tack-spiked in place on the layout, I took a three > point gauge and regauged/respiked the entire switch. I also cleaned-up any > areas with a file that needed touch-up. > > Andre Ming > > > ----- Original Message ----- > From: coalsmoker2194 > To: [email protected] > Sent: Wednesday, February 13, 2013 7:56 PM > Subject: {S-Scale List} Tomalco turnouts > > > I recieved some tomalco turnouts yesterday, and (no surprise from reading > post's here) they were out of guage. Not a little bit, they were way out. My > question is, what do you do to soften/remove the glue holding the rail, to > fix them? > > Bob Davis > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
