On Tue, 9 Jul 2013 08:00:04 -0400, you wrote: Bill,
>Is there even a Proto N Scale? I don?t know? There is FS160 which uses the finer scale standards of the UK 2mm scale Association on 9mm gauge - 2mmFS gauge is 9.42mm which is accurate for their 1:152 (2mm:ft) scale. http://www.fs160.eu/ It's not Proto:N but fine scale standards that modellers in the UK have found practical for many years. Back to S, like Simon Dunkley, I've been using UK exact scale standards for 30-odd years and they work well - I'm just making a set of loco drivers at the moment to these standards and will be using a form tool supplied by the UK S Scale Society to finish off the tyres. In fact you don't get much choice in the UK if you model the UK prototype - its the exact standards, or nothing. :-) Jim. ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
