Hey everyone (especially cygwin people),
I've been trying for the past 2 hours to build sage 5.11.beta3 on
cygwin64, however it continuously fails when building zlib. I've
multiple-checked that I've installed all of the dependencies (and
overkilled on some of them too), and I've installed zlib ver 1.2.8 directly
on cygwin, although sage installation doesn't seem recognize it (same
version). Any idea on how to get this to work? I've tried rebasing,
deleting the partial installation, deleting the entire build. I'm running
off a Windows Vista home premium OS. Below is the relavent portion of the
log file. Any help is greatly appreciated.
Thank you,
Travis
make[2]: Leaving directory `/home/Travis/sage-5.11.beta3/spkg'
env SAGE_BUILD_TOOLCHAIN=yes make -j2 toolchain
make[2]: Entering directory `/home/Travis/sage-5.11.beta3/spkg'
make[2]: warning: -jN forced in submake: disabling jobserver mode.
make[2]: Nothing to be done for `toolchain'.
make[2]: Leaving directory `/home/Travis/sage-5.11.beta3/spkg'
make -j2 toolchain-deps
make[2]: Entering directory `/home/Travis/sage-5.11.beta3/spkg'
make[2]: warning: -jN forced in submake: disabling jobserver mode.
make -j2 /home/Travis/sage-5.11.beta3/spkg/installed/zlib-1.2.8
make[3]: Entering directory `/home/Travis/sage-5.11.beta3/spkg'
make[3]: warning: -jN forced in submake: disabling jobserver mode.
/home/Travis/sage-5.11.beta3/spkg/pipestatus "sage-spkg ${SAGE_SPKG_OPTS}
zlib-1 .2.8 2>&1" "tee -a
/home/Travis/sage-5.11.beta3/logs/pkgs/zlib-1.2.8.log"
Found package zlib-1.2.8 in spkg/standard/zlib-1.2.8.spkg
zlib-1.2.8
====================================================
Extracting package
/home/Travis/sage-5.11.beta3/spkg/standard/zlib-1.2.8.spkg
-rwxr-xr-x 1 Administrators None 532210 Jun 6 01:26
/home/Travis/sage-5.11.beta 3/spkg/standard/zlib-1.2.8.spkg
Finished extraction
****************************************************
Host system:
CYGWIN_NT-6.0 Travis-Notebook 1.7.22(0.268/5/3) 2013-07-22 17:06 x86_64
Cygwin
****************************************************
C compiler: gcc
C compiler version:
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-cygwin/4.8.1/lto-wrapper.exe
Target: x86_64-pc-cygwin
Configured with: /usr/src/ports/gcc/gcc-4.8.1-1/src/gcc-4.8.1/configure
--srcdir =/usr/src/ports/gcc/gcc-4.8.1-1/src/gcc-4.8.1 --prefix=/usr
--exec-prefix=/usr - -bindir=/usr/bin --sbindir=/usr/sbin
--libexecdir=/usr/lib --datadir=/usr/share --localstatedir=/var
--sysconfdir=/etc --datarootdir=/usr/share --docdir=/usr/sh are/doc/gcc -C
--build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=x86_64- pc-cygwin
--without-libiconv-prefix --without-libintl-prefix --enable-shared --e
nable-shared-libgcc --enable-static --enable-version-specific-runtime-libs
--ena ble-bootstrap --disable-__cxa_atexit --with-dwarf2
--with-tune=generic --enable- languages=c,c++,fortran,lto,objc,obj-c++
--enable-graphite --enable-threads=posi x --enable-libatomic
--enable-libgomp --disable-libitm --enable-libquadmath --en
able-libquadmath-support --enable-libssp --enable-libgcj-sublibs
--disable-java- awt --disable-symvers
--with-ecj-jar=/usr/share/java/ecj.jar --with-gnu-ld --wit h-gnu-as
--with-cloog-include=/usr/include/cloog-isl --without-libiconv-prefix -
-without-libintl-prefix --with-system-zlib
Thread model: posix
gcc version 4.8.1 (GCC)
****************************************************
make[4]: Entering directory
`/home/Travis/sage-5.11.beta3/spkg/build/zlib-1.2.8/
src'
gcc -O3 -Wall -c -o adler32.o adler32.c
gcc -O3 -Wall -c -o compress.o compress.c
gcc -O3 -Wall -c -o crc32.o crc32.c
gcc -O3 -Wall -c -o deflate.o deflate.c
gcc -O3 -Wall -c -o gzclose.o gzclose.c
gcc -O3 -Wall -c -o gzlib.o gzlib.c
gzlib.c: In function ‘gz_open’:
gzlib.c:256:9: warning: implicit declaration of function ‘lseek’
[-Wimplicit-fun ction-declaration]
state->start = LSEEK(state->fd, 0, SEEK_CUR);
^
gcc -O3 -Wall -c -o gzread.o gzread.c
gzread.c: In function ‘gz_load’:
gzread.c:30:9: warning: implicit declaration of function ‘read’
[-Wimplicit-func tion-declaration]
ret = read(state->fd, buf + *have, len - *have);
^
gzread.c: In function ‘gzclose_r’:
gzread.c:591:5: warning: implicit declaration of function ‘close’
[-Wimplicit-fu nction-declaration]
ret = close(state->fd);
^
gcc -O3 -Wall -c -o gzwrite.o gzwrite.c
gcc -O3 -Wall -c -o infback.o infback.c
gzwrite.c: In function ‘gz_comp’:
gzwrite.c:84:9: warning: implicit declaration of function ‘write’
[-Wimplicit-fu nction-declaration]
got = write(state->fd, strm->next_in, strm->avail_in);
^
gzwrite.c: In function ‘gzclose_w’:
gzwrite.c:573:5: warning: implicit declaration of function ‘close’
[-Wimplicit-f unction-declaration]
if (close(state->fd) == -1)
^
gcc -O3 -Wall -c -o inffast.o inffast.c
gcc -O3 -Wall -c -o inflate.o inflate.c
gcc -O3 -Wall -c -o inftrees.o inftrees.c
gcc -O3 -Wall -c -o trees.o trees.c
gcc -O3 -Wall -c -o uncompr.o uncompr.c
gcc -O3 -Wall -c -o zutil.o zutil.c
windres --define GCC_WINDRES -o zlibrc.o win32/zlib1.rc
gcc -O3 -Wall -I. -c -o example.o test/example.c
gcc -O3 -Wall -I. -c -o minigzip.o test/minigzip.c
ar rcs libz.a adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o
gzread.o gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o
uncompr.o zutil.o
gcc -shared -Wl,--out-implib,libz.dll.a \
-o zlib1.dll win32/zlib.def adler32.o compress.o crc32.o deflate.o
gzclose.o gzl ib.o gzread.o gzwrite.o infback.o inffast.o inflate.o
inftrees.o trees.o uncomp r.o zutil.o zlibrc.o
gcc -o minigzip.exe minigzip.o libz.a
strip minigzip.exe
Cannot export gzopen_w: symbol not defined
collect2: error: ld returned 1 exit status
Makefile:96: recipe for target `zlib1.dll' failed
make[4]: *** [zlib1.dll] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: Leaving directory
`/home/Travis/sage-5.11.beta3/spkg/build/zlib-1.2.8/s rc'
Error building zlib.
real 0m7.816s
user 0m6.829s
sys 0m2.199s
************************************************************************
Error installing package zlib-1.2.8
************************************************************************
Please email sage-devel (http://groups.google.com/group/sage-devel)
explaining the problem and including the relevant part of the log file
/home/Travis/sage-5.11.beta3/logs/pkgs/zlib-1.2.8.log
Describe your computer, operating system, etc.
If you want to try to fix the problem yourself, *don't* just cd to
/home/Travis/sage-5.11.beta3/spkg/build/zlib-1.2.8 and type 'make' or
whatever i s appropriate.
Instead, the following commands setup all environment variables
correctly and load a subshell for you to debug the error:
(cd '/home/Travis/sage-5.11.beta3/spkg/build/zlib-1.2.8' &&
'/home/Travis/sage -5.11.beta3/sage' --sh)
When you are done debugging, you can type "exit" to leave the subshell.
************************************************************************
Makefile:478: recipe for target
`/home/Travis/sage-5.11.beta3/spkg/installed/zli b-1.2.8' failed
make[3]: *** [/home/Travis/sage-5.11.beta3/spkg/installed/zlib-1.2.8] Error
1
make[3]: Leaving directory `/home/Travis/sage-5.11.beta3/spkg'
Makefile:248: recipe for target `toolchain-deps' failed
make[2]: *** [toolchain-deps] Error 2
make[2]: Leaving directory `/home/Travis/sage-5.11.beta3/spkg'
Makefile:139: recipe for target `all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/Travis/sage-5.11.beta3/spkg'
real 2m15.845s
user 0m43.115s
sys 1m4.234s
***************************************************************
Error building Sage.
The following package(s) may have failed to build:
package: zlib-1.2.8
log file: /home/Travis/sage-5.11.beta3/logs/pkgs/zlib-1.2.8.log
build directory: /home/Travis/sage-5.11.beta3/spkg/build/zlib-1.2.8
The build directory may contain configuration files and other potentially
helpful information. WARNING: if you now run 'make' again, the build
directory will, by default, be deleted. Set the environment variable
SAGE_KEEP_BUILT_SPKGS to 'yes' to prevent this.
Makefile:19: recipe for target `build' failed
make: *** [build] Error 1
--
You received this message because you are subscribed to the Google Groups
"sage-devel" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/sage-devel.
For more options, visit https://groups.google.com/groups/opt_out.
