## Debian
On Debian GNU/Linux 10 (buster), upgraded from
SageMath 8.9.rc0 via git and tested SageMath 8.9,
both py2 and py3. In both cases:
- `make`: ok
- `make testlong`: all tests pass!
## Cygwin
On Cygwin64, tested SageMath 8.9, both py2 and py3,
with the following hardware and operating system:
- laptop: HP ProBook 640 G1
- processor: Intel Core i7-4610M, 3.00 GHz
- memory: 8 GB
- Cygwin64 version: CYGWIN_NT-6.1 3.0.7 (0.338/5/3)
- Windows: Windows 7 Professional (64-bit), Service Pack 1
### Summary
Here is a summary following this structure:
- [file] # [failures or timeouts during make testlong]
--> [result when tested individually]; [ticket references]
- py2:
- src/sage/doctest/forker.py # 4 doctests failed
--> passes when tested individually
- src/sage/parallel/map_reduce.py # Timed out after testing finished
--> passes when tested individually; might be #27537
- py3
- src/sage/coding/linear_code.py # Timed out
--> passes when tested individually; might be #26119
- src/sage/libs/eclib/interface.py # 1 doctest failed
--> still fails when tested individually; see #28472 (positive review)
- src/sage/rings/finite_rings/finite_field_base.pyx # 1 doctest failed
--> passes when tested individually
- src/sage/rings/polynomial/polynomial_rational_flint.pyx # 1 doctest failed
--> still fails when tested individually; this is #28334
- src/sage_setup/clean.py # 1 doctest failed
--> still fails when tested individually
Read on for the details for each of py2 and py3.
### Python 2
Upgraded from SageMath 8.9.rc0 via git.
Ran `make`: success. Ran `make testlong` and individually
retested files that failed or timed out, see below.
$ make testlong
...
----------------------------------------------------------------------
sage -t --long --warn-long 87.2 src/sage/doctest/forker.py # 4 doctests failed
sage -t --long --warn-long 87.2 src/sage/parallel/map_reduce.py #
Timed out after testing finished
----------------------------------------------------------------------
$ ./sage -t --long --warn-long 87.2 src/sage/doctest/forker.py
Running doctests with ID 2019-10-01-08-19-19-2f160fbc.
Git branch: develop
Using --optional=build,dochtml,python2,sage
Doctesting 1 file.
sage -t --long --warn-long 87.2 src/sage/doctest/forker.py
[449 tests, 34.21 s]
----------------------------------------------------------------------
All tests passed!
----------------------------------------------------------------------
Total time for all tests: 81.7 seconds
cpu time: 5.5 seconds
cumulative wall time: 34.2 seconds
$ ./sage -t --long --warn-long 87.2 src/sage/parallel/map_reduce.py
Running doctests with ID 2019-10-01-08-21-35-400c0707.
Git branch: develop
Using --optional=build,dochtml,python2,sage
Doctesting 1 file.
sage -t --long --warn-long 87.2 src/sage/parallel/map_reduce.py
[294 tests, 33.43 s]
----------------------------------------------------------------------
All tests passed!
----------------------------------------------------------------------
Total time for all tests: 34.0 seconds
cpu time: 5.2 seconds
cumulative wall time: 33.4 seconds
### Python 3
Upgraded from SageMath 8.9.rc0 via git.
Ran `make`: success. Ran `make testlong` and individually
retested files that failed or timed out, see below.
$ make testlong
...
----------------------------------------------------------------------
sage -t --long --warn-long 87.2 src/sage/coding/linear_code.py # Timed out
sage -t --long --warn-long 87.2 src/sage/libs/eclib/interface.py # 1
doctest failed
sage -t --long --warn-long 87.2
src/sage/rings/finite_rings/finite_field_base.pyx # 1 doctest failed
sage -t --long --warn-long 87.2
src/sage/rings/polynomial/polynomial_rational_flint.pyx # 1 doctest
failed
sage -t --long --warn-long 87.2 src/sage_setup/clean.py # 1 doctest failed
----------------------------------------------------------------------
$ ./sage -t --long --warn-long 87.2 src/sage/coding/linear_code.py
Running doctests with ID 2019-10-01-07-58-10-19e3fc53.
Git branch: develop
Using --optional=build,dochtml,python2,sage
Doctesting 1 file.
sage -t --long --warn-long 87.2 src/sage/coding/linear_code.py
[749 tests, 28.33 s]
----------------------------------------------------------------------
All tests passed!
----------------------------------------------------------------------
Total time for all tests: 29.2 seconds
cpu time: 25.8 seconds
cumulative wall time: 28.3 seconds
$ ./sage -t --long --warn-long 87.2 src/sage/libs/eclib/interface.py
Running doctests with ID 2019-10-01-07-58-59-bd646d17.
Git branch: develop
Using --optional=build,dochtml,python2,sage
Doctesting 1 file.
sage -t --long --warn-long 87.2 src/sage/libs/eclib/interface.py
**********************************************************************
File "src/sage/libs/eclib/interface.py", line 597, in
sage.libs.eclib.interface.mwrank_EllipticCurve.saturate
Failed example:
E.saturation([Q1,Q2])
Expected:
([(1 : -27 : 1), (157 : 1950 : 1)], 3, 0.801588644684981)
Got:
Attempt to round -0.2617840677e25 to a long int fails, aborting!
([(1 : -27 : 1), (157 : 1950 : 1)], 3, 0.801588644684981)
**********************************************************************
1 item had failures:
1 of 9 in sage.libs.eclib.interface.mwrank_EllipticCurve.saturate
[192 tests, 1 failure, 5.96 s]
----------------------------------------------------------------------
sage -t --long --warn-long 87.2 src/sage/libs/eclib/interface.py # 1
doctest failed
----------------------------------------------------------------------
Total time for all tests: 6.5 seconds
cpu time: 5.7 seconds
cumulative wall time: 6.0 seconds
$ ./sage -t --long --warn-long 87.2
src/sage/rings/finite_rings/finite_field_base.pyx
Running doctests with ID 2019-10-01-08-01-55-2dd8733a.
Git branch: develop
Using --optional=build,dochtml,python2,sage
Doctesting 1 file.
sage -t --long --warn-long 87.2
src/sage/rings/finite_rings/finite_field_base.pyx
[272 tests, 18.14 s]
----------------------------------------------------------------------
All tests passed!
----------------------------------------------------------------------
Total time for all tests: 18.7 seconds
cpu time: 18.0 seconds
cumulative wall time: 18.1 seconds
$ ./sage -t --long --warn-long 87.2
src/sage/rings/polynomial/polynomial_rational_flint.pyx
Running doctests with ID 2019-10-01-08-03-34-441e450a.
Git branch: develop
Using --optional=build,dochtml,python2,sage
Doctesting 1 file.
sage -t --long --warn-long 87.2
src/sage/rings/polynomial/polynomial_rational_flint.pyx
**********************************************************************
File "src/sage/rings/polynomial/polynomial_rational_flint.pyx", line
2055, in
sage.rings.polynomial.polynomial_rational_flint.Polynomial_rational_flint.galois_group
Failed example:
G = f.galois_group(); G
Expected:
Transitive group number 5 of degree 4
Got:
Exception (FLINT memory_manager). Unable to allocate memory.
Transitive group number 5 of degree 4
**********************************************************************
1 item had failures:
1 of 16 in
sage.rings.polynomial.polynomial_rational_flint.Polynomial_rational_flint.galois_group
[397 tests, 1 failure, 5.79 s]
----------------------------------------------------------------------
sage -t --long --warn-long 87.2
src/sage/rings/polynomial/polynomial_rational_flint.pyx # 1 doctest
failed
----------------------------------------------------------------------
Total time for all tests: 6.3 seconds
cpu time: 4.7 seconds
cumulative wall time: 5.8 seconds
$ ./sage -t --long --warn-long 87.2 src/sage_setup/clean.py
Running doctests with ID 2019-10-01-08-04-44-25198bd4.
Git branch: develop
Using --optional=build,dochtml,python2,sage
Doctesting 1 file.
sage -t --long --warn-long 87.2 src/sage_setup/clean.py
**********************************************************************
File "src/sage_setup/clean.py", line 100, in sage_setup.clean._find_stale_files
Failed example:
for f in stale_iter:
if f.endswith(skip_extensions): continue
print('Found stale file: ' + f)
Expected nothing
Got:
Found stale file: sage/graphs/__pycache__/line_graph.cpython-37.pyc
**********************************************************************
1 item had failures:
1 of 11 in sage_setup.clean._find_stale_files
[17 tests, 1 failure, 0.51 s]
----------------------------------------------------------------------
sage -t --long --warn-long 87.2 src/sage_setup/clean.py # 1 doctest failed
----------------------------------------------------------------------
Total time for all tests: 1.0 seconds
cpu time: 0.5 seconds
cumulative wall time: 0.5 seconds
--
You received this message because you are subscribed to the Google Groups
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/sage-release/CAEcArF06vXMyROkEshs%3DYV1_500kbwPDhQGJBH39B14i8Ku3Qg%40mail.gmail.com.
