I installed 4.7.1 yesterday from source as a user. (Note: I have
another sage elsewhere in the tree that I had done an unsuccessful
source upgrade to.) It produced an error, but when I rebooted and
typed 'make' again it didn't produce the error again. The error was
spkg/logs/zlib-1.2.5.log:sage: An error occurred while installing
zlib-1.2.5
It did, however, later in the process, crash linux (boot me to login
screen - very rare!). Upon logging back in, I typed make and the
build finished and sage appeared to be working fine.
However, upon running a full doctest, I discovered that calculus/
riemann.pyx was producing errors. Below you'll find the riemann
errors, the zlib log file contents (quite possibly unrelated!), and my
full system information.
If it is suggested I do so, I'll open a ticket.
Also, if it is suggested, I'll reinstall the whole thing again. If
there are instructions on correctly deleting an install in order
reinstall, I'd appreciate a pointer.
Kate.
~~~~
Here's the error I'm getting upon running all the doctests (all the
rest are fine):
{{{
kate@camarillobrillo:~/sage/sage-4.7.1$ ./sage -t --long devel/sage-
main/sage/calculus/riemann.pyx
sage -t --long "devel/sage-main/sage/calculus/riemann.pyx"
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 127:
sage: print "error =", m.inverse_riemann_map(m.riemann_map(x)) -
x # long time
Expected:
error = (-0.000...+0.0016...j)
Got:
error = (-0.00902879939467+0.00443849285082j)
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 591:
sage: m.inverse_riemann_map(0.5 + sqrt(-0.5))
Expected:
(0.406880548363...+0.361470279816...j)
Got:
(-0.21112957879745675-0.78621750901554122j)
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 593:
sage: m.inverse_riemann_map(0.95)
Expected:
(0.486319431795...-4.90019052...j)
Got:
(-0.51194263386808336-0.10834810533159614j)
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 595:
sage: m.inverse_riemann_map(0.25 - 0.3*I)
Expected:
(0.165324498558...-0.180936785500...j)
Got:
(-0.20230769498213769+0.14722552043545994j)
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 598:
sage: m.inverse_riemann_map(np.complex(-0.2, 0.5))
Expected:
(-0.156280570579...+0.321819151891...j)
Got:
(0.26439601633071175-0.22837051122058633j)
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 337:
sage: s(3*pi / 4)
Expected:
0.00121587378429...
Got:
0.0011753568941062504
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 406:
sage: s(3*pi / 4)
Expected:
1.62766037996...
Got:
-1.8323675486952644
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 511:
sage: m.riemann_map(0.25 + sqrt(-0.5))
Expected:
(0.137514...+0.87669602...j)
Got:
(-0.4896363718468919-0.74542828883326839j)
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 513:
sage: m.riemann_map(1.3*I)
Expected:
(-1.56...e-05+0.989694...j)
Got:
(-0.37701131420458239-0.97071644421990144j)
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 516:
sage: m.riemann_map(0.4)
Expected:
(0.733242677...+3.2...e-06j)
Got:
(-0.61715472290891882+0.30813518059128492j)
**********************************************************************
File "/home/kate/sage/sage-4.7.1/devel/sage-main/sage/calculus/
riemann.pyx", line 519:
sage: m.riemann_map(np.complex(-3, 0.0001))
Expected:
(1.405757...e-05+8.06...e-10j)
Got:
(-0.019186716219611256+0.0067706626728264189j)
**********************************************************************
5 items had failures:
1 of 16 in __main__.example_1
4 of 11 in __main__.example_10
1 of 18 in __main__.example_5
1 of 17 in __main__.example_6
4 of 12 in __main__.example_8
***Test Failed*** 11 failures.
For whitespace errors, see the file /home/kate/.sage//
tmp/.doctest_riemann.py
[29.1 s]
----------------------------------------------------------------------
The following tests failed:
sage -t --long "devel/sage-main/sage/calculus/riemann.pyx"
Total time for all tests: 29.1 seconds
}}}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My system:
Ubuntu 10.04.3 LTS
SYSTEM INFORMATION
Running Ubuntu Linux, the Ubuntu 10.04 (lucid) release.
GNOME: 2.30.2 (Ubuntu 2010-06-25)
Kernel version: 2.6.35-22-generic (#35-Ubuntu SMP Sat Oct 16 20:45:36
UTC 2010)
GCC: 4.4.3 (x86_64-linux-gnu)
Xorg: unknown (08 March 2011 08:22:34AM)
Hostname: camarillobrillo
Uptime: 0 days 13 h 2 min
CPU INFORMATION
GenuineIntel, Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz
Number of CPUs: 4
CPU clock currently at 2701.000 MHz with 4096 KB cache
Numbering: family(6) model(42) stepping(7)
Bogomips: 5382.26
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology
nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est
tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt aes xsave avx
lahf_lm ida arat pln pts tpr_shadow vnmi flexpriority ept vpid
MEMORY INFORMATION
Total memory: 7891 MB
Total swap: 2765 MB
STORAGE INFORMATION
SCSI device - scsi0
Vendor: ATA
Model: TOSHIBA THNSNC12
HARDWARE INFORMATION
MOTHERBOARD
Host bridge
Intel Corporation Device 0104 (rev 09)
Subsystem: Lenovo Device 21da
PCI bridge(s)
Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4)
Intel Corporation Cougar Point PCI Express Root Port 2 (rev b4)
Intel Corporation Cougar Point PCI Express Root Port 4 (rev b4)
Intel Corporation Cougar Point PCI Express Root Port 5 (rev b4)
Intel Corporation Cougar Point PCI Express Root Port 7 (rev b4)
USB controller(s)
Intel Corporation Cougar Point USB Enhanced Host Controller #2
(rev
04) (prog-if 20)
Intel Corporation Cougar Point USB Enhanced Host Controller #1
(rev
04) (prog-if 20)
NEC Corporation Device 0194 (rev 04) (prog-if 30)
ISA bridge
Intel Corporation Device 1c4f (rev 04)
Subsystem: Lenovo Device 21da
GRAPHIC CARD
VGA controller
Intel Corporation Device 0126 (rev 09)
Subsystem: Lenovo Device 21da
SOUND CARD
Multimedia controller
Intel Corporation Cougar Point High Definition Audio Controller
(rev
04)
Subsystem: Lenovo Device 21da
NETWORK
Network controller
Intel Corporation WiMAX/WiFi Link 6050 Series (rev 5e)
Subsystem: Intel Corporation Device 1311
Ethernet controller
Intel Corporation Device 1502 (rev 04)
Subsystem: Lenovo Device 21ce
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And finally the zlib log file.
Warning: Attempted to overwrite SAGE_ROOT environment variable
zlib-1.2.5
Machine:
Linux camarillobrillo 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16
20:45:36 UTC 2010 x86_64 GNU/Linux
Deleting directories from past builds of previous/current versions of
zlib-1.2.5
Extracting package /home/kate/sage/sage-4.7.1/spkg/standard/
zlib-1.2.5.spkg ...
-rw-r--r-- 1 kate kate 499147 2010-07-25 20:53 /home/kate/sage/
sage-4.7.1/spkg/standard/zlib-1.2.5.spkg
Finished extraction
****************************************************
Host system
uname -a:
Linux camarillobrillo 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16
20:45:36 UTC 2010 x86_64 GNU/Linux
****************************************************
****************************************************
CC Version
gcc -v
Using built-in specs.
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
4.4.3-4ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.4/
README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/
usr --enable-shared --enable-multiarch --enable-linker-build-id --with-
system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-
threads=posix --with-gxx-include-dir=/usr/include/c++/4.4 --program-
suffix=-4.4 --enable-nls --enable-clocale=gnu --enable-libstdcxx-debug
--enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i486
--with-tune=generic --enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5)
****************************************************
Checking for shared library support...
Building shared library libz.so.1.2.5 with gcc.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for unistd.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using
vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
make[2]: Entering directory `/home/kate/sage/sage-4.7.1/spkg/build/
zlib-1.2.5/src'
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o example.o example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o adler32.o adler32.c
make[2]: *** [adler32.o] Killed
make[2]: Leaving directory `/home/kate/sage/sage-4.7.1/spkg/build/
zlib-1.2.5/src'
Error building zlib
This may not be fatal
make[2]: Entering directory `/home/kate/sage/sage-4.7.1/spkg/build/
zlib-1.2.5/src'
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o adler32.o adler32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o compress.o compress.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o crc32.o crc32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o deflate.o deflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o gzclose.o gzclose.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o gzlib.o gzlib.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o gzread.o gzread.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o gzwrite.o gzwrite.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o infback.o infback.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o inffast.o inffast.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o inflate.o inflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o inftrees.o inftrees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o trees.o trees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o uncompr.o uncompr.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o zutil.o zutil.c
ar rc libz.a adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o
gzread.o gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o
uncompr.o zutil.o
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/adler32.o
adler32.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/compress.o
compress.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/crc32.o crc32.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/deflate.o
deflate.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/gzclose.o
gzclose.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/gzlib.o gzlib.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/gzread.o
gzread.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/gzwrite.o
gzwrite.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/infback.o
infback.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/inffast.o
inffast.c
make[2]: *** [inffast.lo] Killed
make[2]: Leaving directory `/home/kate/sage/sage-4.7.1/spkg/build/
zlib-1.2.5/src'
Error installing zlib
real 0m3.436s
user 0m2.730s
sys 0m0.170s
sage: An error occurred while installing zlib-1.2.5
Please email sage-devel http://groups.google.com/group/sage-devel
explaining the problem and send the relevant part of
of /home/kate/sage/sage-4.7.1/install.log. Describe your computer,
operating system, etc.
If you want to try to fix the problem yourself, *don't* just cd to
/home/kate/sage/sage-4.7.1/spkg/build/zlib-1.2.5 and type 'make check'
or whatever is appropriate.
Instead, the following commands setup all environment variables
correctly and load a subshell for you to debug the error:
(cd '/home/kate/sage/sage-4.7.1/spkg/build/zlib-1.2.5' && '/home/kate/
sage/sage-4.7.1/sage' -sh)
When you are done debugging, you can type "exit" to leave the
subshell.
Warning: Attempted to overwrite SAGE_ROOT environment variable
zlib-1.2.5
Machine:
Linux camarillobrillo 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16
20:45:36 UTC 2010 x86_64 GNU/Linux
Deleting directories from past builds of previous/current versions of
zlib-1.2.5
Extracting package /home/kate/sage/sage-4.7.1/spkg/standard/
zlib-1.2.5.spkg ...
-rw-r--r-- 1 kate kate 499147 2010-07-25 20:53 /home/kate/sage/
sage-4.7.1/spkg/standard/zlib-1.2.5.spkg
Finished extraction
****************************************************
Host system
uname -a:
Linux camarillobrillo 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16
20:45:36 UTC 2010 x86_64 GNU/Linux
****************************************************
****************************************************
CC Version
gcc -v
Using built-in specs.
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
4.4.3-4ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.4/
README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/
usr --enable-shared --enable-multiarch --enable-linker-build-id --with-
system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-
threads=posix --with-gxx-include-dir=/usr/include/c++/4.4 --program-
suffix=-4.4 --enable-nls --enable-clocale=gnu --enable-libstdcxx-debug
--enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i486
--with-tune=generic --enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5)
****************************************************
Checking for shared library support...
Building shared library libz.so.1.2.5 with gcc.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for unistd.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using
vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
make[2]: Entering directory `/home/kate/sage/sage-4.7.1/spkg/build/
zlib-1.2.5/src'
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o example.o example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o adler32.o adler32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o compress.o compress.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o crc32.o crc32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o deflate.o deflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o gzclose.o gzclose.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o gzlib.o gzlib.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o gzread.o gzread.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o gzwrite.o gzwrite.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o infback.o infback.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o inffast.o inffast.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o inflate.o inflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o inftrees.o inftrees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o trees.o trees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o uncompr.o uncompr.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o zutil.o zutil.c
ar rc libz.a adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o
gzread.o gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o
uncompr.o zutil.o
gcc -O3 -D_LARGEFILE64_SOURCE=1 -o example example.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -c -o minigzip.o minigzip.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -o minigzip minigzip.o -L. libz.a
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/adler32.o
adler32.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/compress.o
compress.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/crc32.o crc32.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/deflate.o
deflate.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/gzclose.o
gzclose.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/gzlib.o gzlib.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/gzread.o
gzread.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/gzwrite.o
gzwrite.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/infback.o
infback.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/inffast.o
inffast.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/inflate.o
inflate.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/inftrees.o
inftrees.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/trees.o trees.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/uncompr.o
uncompr.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DPIC -c -o objs/zutil.o zutil.c
gcc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map -O3 -fPIC -
D_LARGEFILE64_SOURCE=1 -o libz.so.1.2.5 adler32.lo compress.lo
crc32.lo deflate.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo
infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo
zutil.lo -lc -L. libz.a
rm -f libz.so libz.so.1
ln -s libz.so.1.2.5 libz.so
ln -s libz.so.1.2.5 libz.so.1
gcc -O3 -D_LARGEFILE64_SOURCE=1 -o examplesh example.o -L. libz.so.
1.2.5
gcc -O3 -D_LARGEFILE64_SOURCE=1 -o minigzipsh minigzip.o -L. libz.so.
1.2.5
gcc -O3 -D_LARGEFILE64_SOURCE=1 -D_FILE_OFFSET_BITS=64 -c -o
example64.o example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -o example64 example64.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -D_FILE_OFFSET_BITS=64 -c -o
minigzip64.o minigzip.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -o minigzip64 minigzip64.o -L. libz.a
make[2]: Leaving directory `/home/kate/sage/sage-4.7.1/spkg/build/
zlib-1.2.5/src'
make[2]: Entering directory `/home/kate/sage/sage-4.7.1/spkg/build/
zlib-1.2.5/src'
cp libz.a /home/kate/sage/sage-4.7.1/local/lib
cp libz.so.1.2.5 /home/kate/sage/sage-4.7.1/local/lib
cd /home/kate/sage/sage-4.7.1/local/lib; chmod u=rw,go=r libz.a
cp zlib.3 /home/kate/sage/sage-4.7.1/local/share/man/man3
chmod 644 /home/kate/sage/sage-4.7.1/local/share/man/man3/zlib.3
cp zlib.pc /home/kate/sage/sage-4.7.1/local/lib/pkgconfig
chmod 644 /home/kate/sage/sage-4.7.1/local/lib/pkgconfig/zlib.pc
cp zlib.h zconf.h /home/kate/sage/sage-4.7.1/local/include
chmod 644 /home/kate/sage/sage-4.7.1/local/include/zlib.h /home/kate/
sage/sage-4.7.1/local/include/zconf.h
make[2]: Leaving directory `/home/kate/sage/sage-4.7.1/spkg/build/
zlib-1.2.5/src'
real 0m5.931s
user 0m4.240s
sys 0m0.340s
Successfully installed zlib-1.2.5
Now cleaning up tmp files.
Making Sage/Python scripts relocatable...
Making script relocatable
Finished installing zlib-1.2.5.spkg
--
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/sage-support
URL: http://www.sagemath.org
